The Issue could be the impeller or the unit itself.

  • Try the following steps to see if the impeller is bad.
  1. Pop out impeller and then reinsert to see if issue resolved.
  2. If not, go get a magnet. A refrigerator magnet is fine.
  3. Pop out the impeller and put Kestrel display screen on Wind.
  4. Move magnet around impeller area and take note of any wind reading.
  5. If a small wind reading appears, impeller is defective: replace the impeller with a new impeller from ExtremeMeters.com.
  6. If no wind reading appears, unit is defective:  send unit into NK for repair.

Latest Stories

View all

Kestrel LiNK Wireless USB Dongle – What It Does and When You Need It

Kestrel LiNK Wireless USB Dongle – What It Does and When You Need It

The Kestrel LiNK Wireless USB Dongle enables wireless data transfer and firmware updates between Kestrel 5 Series LiNK meters and your Windows PC or Mac. Learn what it does, who needs it, and how it fits into your field data workflow.

Read moreabout Kestrel LiNK Wireless USB Dongle – What It Does and When You Need It

Kestrel 5500 Weather Meter: A Force Multiplier for Military Drone Operations

Kestrel 5500 Weather Meter: A Force Multiplier for Military Drone Operations

Discover how the Kestrel 5500 Weather Meter gives military drone units a critical edge — delivering real-time wind, density altitude, and atmospheric data in a rugged, field-ready package.

Read moreabout Kestrel 5500 Weather Meter: A Force Multiplier for Military Drone Operations

The Best Weather Meters for Wildland Firefighters

The Best Weather Meters for Wildland Firefighters

Wildland firefighters operate in rapidly changing environments where accurate weather information can mean the difference between a controlled burn and a dangerous situation. Wind speed, humidity, temperature, and fuel moisture all play a major role in fire behavior. For this...

Read moreabout The Best Weather Meters for Wildland Firefighters