Monitor de estrés por calor Kestrel DROP D2HS
Kestrel







Resumen del monitor de estrés por calor Kestrel DROP D2HS
Conozca sus condiciones de temperatura y humedad en cualquier lugar con el pequeño y resistente monitor de estrés por calor Kestrel DROP D2.El registrador de datos Kestrel DROP D2 se puede colocar donde sea necesario para registrar la temperatura y la humedad con los registros de datos recuperados de forma inalámbrica y automática en la aplicación Kestrel LiNK cuando se encuentra dentro del alcance inalámbrico (hasta 100' o más en la línea de visión). Cada DROP mide solo 1 x 1,8 x 2,4 pulgadas (24 x 46 mm x 60 mm) y pesa solo 1,2 onzas (34 gramos). Los registradores DROP cumplen con los estándares militares e internacionales de resistencia al agua, al polvo y a los golpes (IP-67 y MIL-STD-810G) y están convenientemente equipados con un resistente anillo en D para colgar donde sea necesario. Descargue el Kestrel LiNK gratuito en su teléfono inteligente. Con Kestrel LiNK en su teléfono inteligente o tableta, puede ver lecturas en tiempo real desde cualquier registrador DROP dentro del alcance inalámbrico (hasta 100 pies o más en la línea de visión) a través de Bluetooth Low Energy. Cada teléfono o tableta puede conectarse a hasta 8 registradores DROP al mismo tiempo y almacenar registros de datos de muchos más. Las lecturas mín./máx./promedio se muestran claramente y el registro de datos se puede ver como un gráfico de desplazamiento con datos detallados para cada punto registrado. La aplicación Kestrel LiNK también permite el ajuste del intervalo de registro y otras configuraciones, así como alertas de umbral en tiempo real. Las lecturas se pueden actualizar cada 2 segundos y la hora y la fecha de registro se actualizan automáticamente cada vez que se conecta a su dispositivo inteligente. También puede enviar y compartir datos ambientales registrados y en tiempo real por correo electrónico, Facebook o Twitter. Incluye: Modelo y SKU: Todos los instrumentos ambientales Kestrel están diseñados y construidos completamente en los EE. UU. La historia y el enfoque de Kestrel en la calidad y la robustez se reflejan en la garantía de cinco años líder en la industria de DROP. Kestrel ha estado construyendo instrumentos ambientales resistentes que ayudan a las personas a hacer su trabajo de manera más segura y eficiente durante más de quince años y ha construido una reputación de confiabilidad de un metro a la vez.
Utilice un DROP en cualquier lugar: pequeño, preciso, resistente y resistente al agua
Aplicación Kestrel LiNK gratuita:
SOLTAR puntos de datos D1-D3
SOLTAR D1: Puntos de datos: 13064
SOLTAR D2: Puntos de datos: 8165
SOLTAR D3: Puntos de datos: 6220
Duración de la batería:
Requisitos:
Medidas
Características
Quién usa el monitor de estrés por calor Kestrel DROP D2HS
Calidad de fabricación estadounidense y cinco años de garantía
Features
Temperature, Relative Humidity, Dew Point Temperature, Heat Stress Index y Bluetooth
Includes
(1) CR2032 Lithium Battery, Instructions y Certificate Of Conformity (Spec Sheet)
Kestrel DROP D1 - D3 Sensor Specifications
Kestrel D1 - D3 Sensor Specifications
SENSORS | ||||
---|---|---|---|---|
SENSORS | ACCURACY (+/-) | RESOLUTION | SPECIFICATION RANGE | NOTES |
AmbientTemperature | 0.9 °F 0.5 °C |
0.1 °F 0.1 °C | 14 to 131°F -10 to 55 °C |
Airflow of 2.2 mph|1 m/s or greater provides fastest response and reduction of insolation effect. For greatest accuracy, avoid direct sunlight on the temperature sensor and prolonged sunlight exposure to the unit in low airflow conditions. Calibration drift is negligible for the life of the product. For further details, see Battery Operational Temperature Limits. |
Relative Humidity | 2%RH | 0.1 %RH | 10 to 90% 25°C noncondensing | To achieve stated accuracy, unit must be permitted to equilibrate to external temperature when exposed to large, rapid temperature changes and be kept out of direct sunlight. Calibration drift is typically less than ±0.25% per year. |
Pressure | 1.5 hPa|mbar 0.044 inHg 0.022 PSI |
0.1 hPa|mbar 0.01 inHg 0.01 PSI |
25°C/77°F 700-1100 hPa|mbar 20.67-32.48 inHg 10.15-15.95 PSI |
Monolithic silicon piezo-resistive pressure sensor with second-order temperature correction. Between 1100–1600 mbar, unit will operate with reduced accuracy. Sensor may not operate above 1600 mbar and can be damaged above 6,000 mbar or below 10 mbar. Calibration drift is negligible for the life of the product. |
CALCULATED MEASUREMENTS | |||
---|---|---|---|
MEASUREMENT | ACCURACY (+/-) | RESOLUTION | SENSORS EMPLOYED |
Density Altitude | 226 ft 69 m |
1 ft 1 m | Temperature, Relative Humidity Pressure |
Dew Point | 3.4 °F 1.9 °C 15- 95% RH. Refer to Range for Temperature Sensor |
0.1 °F 0.1 °C |
Temperature, Relative Humidity |
Heat Index | 7.1°F 4.0°C |
0.1 °F 0.1 °C |
Temperature, Relative Humidity |
THI (NRC) | 1.5 °F 0.8 °C |
0.1 °F 0.1 °C |
Temperature, Relative Humidity |
THI (Yousef) | 2.3 °F 1.3 °C |
0.1 °F 0.1 °C |
Temperature, Relative Humidity |
Wet Bulb Temperature - Psychrometric | 3.2 °F 1.8 °C |
0.1 °F 0.1 °C |
Temperature, Relative Humidity Pressure |
ADDITIONAL PRODUCT INFO | |
---|---|
Response Time & Display Update | Display updates every 1 second. After exposure to large environmental changes, all sensors require an equilibration period to reach stated accuracy. Measurements employing RH may require longer periods particularly after prolonged exposure to very high or very low humidity. WBGT requires about 8 minutes to reach 95% accuracy and about 15 minutes to reach 99% accuracy after exposure to large environmental changes. |
Data Storage | Logged history stored for every measured value. Auto-store interval settable from 2 seconds to 12 hours*, overwrite on or off. D1: >13,000 data points, D2: >7,000 data points, D3: >6,000 data points. |
Bluetooth® Data Connect Option | Wireless range up to 100ft|30m. Compatible with Kestrel LiNK app for iOS (model 4s and later) and select Android products (Android 4.3 and higher) (See website for complete list of compatible 3rd party apps). |
Certifications | CE certified, RoHS, FCC, IC tested and WEEE compliant. Individually tested to NIST-traceable standards. |
Origin | Designed and manufactured in the USA from US and imported components. Complies with Regional Value Content and Tariff Code Transformation requirements for NAFTA Preference Criterion B. |
Battery | User-replaceable CR2032 (included). |
Shock Resistance | MIL-STD-810g, Transit Shock, Method 516.6 Procedure IV; unit only; impact may damage replaceable impeller. |
Sealing | Waterproof (IP67 and NEMA-6) |
Battery Operational Temperature Limits | 0° F to 140 ° F | -18 °C to 60°C Measurements may be taken beyond the limits of the operational temperature range of batteries by maintaining the unit within the operational range and then exposing it to the more extreme environment for the minimum time necessary to take reading. |
Storage Temperature | -22.0 °F to 140.0 °F | -30.0 °C to 60.0 °C. |
Size & Weight | 2.4 x 1.8 x 0.9 in | 6 x 4.5 x 2.3 cm 1.2oz | 34g (Lithium battery included) |