Skip to content

Country

Spend $35 for Free Shipping | $250 for Free 2 Day | Global Shipping

When should I recalibrate my Kestrel Meter's sensors?

Recalibration Recommendations:

Kestrel Humidity Sensor

  • Can drift up to +/- 2% for every 24 months.
  • This is independent of whether or not the Kestrel is being used.
  • Recommend every 2 years to stay within specs.

Kestrel Wind Sensor (Impeller)

  • Drift is < 1% after 100 hours use at 16 MPH.
  • This is dependent on usage.
  • Recommend purchase new impeller every 2 – 3 years based on usage.

Kestrel Temperature Sensor

  • Sensor will have negligible drift during the life of the product.
  • Should not need recalibration.

Kestrel Pressure Sensor

  • Sensor will have negligible drift during the life of the product.
  • Can be recalibrated in the field with a known reference source.
  • Contact NK before adjusting System Barometric Pressure however.
    Older Post
    Newer Post

    Leave a comment

    Please note, comments must be approved before they are published

    Close (esc)

    Popup

    Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

    Age verification

    By clicking enter you are verifying that you are old enough to consume alcohol.

    Search